Prof. V. Kartik Publications
Singh K.K., Kulkarni S.S., Kartik V., Singh R., A free interface component mode synthesis approach for determining the micro-end mill dynamics, Journal of Micro and Nano-Manufacturing, 2018,
Joshi P., Kartik V, Transmission and Control Strategy Optimization for a Parallel Hybrid Electric Micro-Utility Vehicle in Urban Drive Cycles, IEEE Transportation and Electrification Conference and Expo, ITEC, 2018,
Khandagale P., Bhakar G., Kartik V., Joshi S.S., Modelling time-domain vibratory deflection response of thin-walled cantilever workpieces during flank milling, Journal of Manufacturing Processes, 2018,
Lad P., Kartik V., Stability transitions of an axially moving string subjected to a distributed follower force, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2018,
Dey S., Kartik V, Intermittent impact dynamics of a cantilever scanning a surface at high speed, Journal of Applied Physics, 2018,
Maity S., Kartik V., Sahu P.P., Swain P.K., Bhunia C.T., Debnath S., Unavoidable front contact model of Si solar cell through a generalized effective medium approximation approach, Sadhana - Academy Proceedings in Engineering Sciences, 2018,
Khandagale P., Kartik V., Joshi S., Forced vibration response of a micro-cantilever beam with moving loads, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems, AMIAMS , 2017,
Singh K.K., Kartik V., Singh R., Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V,, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2017,
Singh K.K., Kartik V., Singh R., Component Mode Synthesis Approach for Micro End Mill Dynamics Considering Machine Tool Compliance, Procedia CIRP, 2017,
Joseph T.J., Kartik V., Nanometer resolution dynamic displacement measurement in industrial/high noise environments, Proceedings of the IEEE International Conference on Industrial Technology, 2016,
Lad P., Somani A., Krishnan K.E., Gupta A., Kartik V., High-throughput shape classification using support vector machine, Proceedings of the IEEE International Conference on Industrial Technology, 2016,
Gupta A.K., Kartik V., Ramanarayanan C.P., Experimental Study on Performance of a Parallel Diesel Hybrid Vehicle Retrofitted with a Single Planetary Gear Train as an Add-On Transmission, SAE Technical Papers, 2016,
Chachada M., Vachhani L., Kartik V., Empirical waypoint navigator for overactuated autonomous underwater vehicle using novel kinematic-dynamic controller pair and control allocation techniques, Indian Control Conference, ICC 2016 - Proceedings, 2016,
Gupta A.K., Kartik V., Ramanarayanan C.P., Design, development and performance evaluation of a light diesel hybrid electric pickup vehicle using a new parallel hybrid transmission system, IEEE International Transportation Electrification Conference, ITEC-India , 2016,
Singh K.K., Kartik V., Singh R, Segmented cutting coefficient based chatter modeling for highspeed micromilling of Ti6Al4V, ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC, 2016,
Singh N., Agrawal A., Wanaskar K., Kartik V., Joshi S.S, Analyzing the effect of workpiece stiffness variation on the stability in flank milling of an impeller blade, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE, 2016,
Singh K.K., Kartik V., Singh R, Modeling dynamic stability in high-speed micromilling of Ti-6Al-4V via velocity and chip load dependent cutting coefficients, International Journal of Machine Tools and Manufacture, 2015,
Lad P., Kartik V, Dynamics and stability of a travelling string subjected to an axial follower force, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE),, 2015,
Anilkumar A., Kartik V., In-plane parametric instability of a rigid body with a dual-rotor system, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE, 2015,
Dey S., Kartik V., Intermittent contact dynamics of a micro-cantilever in high speed contact mode scanning probe microscopy, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2015,
Singh K.K., Singh R., Kartik V., Comparative Study of Chatter Detection Methods for High-Speed Micromilling of Ti6Al4V, Procedia Manufacturing, 2015,
Sabade V., Joseph T.J., Kartik V., An analytical design methodology for high speed nanopositioning scanners, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2015,
Tuma T., Lygeros J., Kartik V., Sebastian A., Pantazi A., High-speed multiresolution scanning probe microscopy based on Lissajous scan trajectories, Nanotechnology, 2012,
Kartik V., Sebastian A., Tuma T., Pantazi A., Pozidis H., Sahoo D.R, High-bandwidth nanopositioner with magnetoresistance based position sensing, Mechatronics, 2012,
Kartik V., Pantazi A., Lantz M.A, Track-following high frequency lateral motion of flexible magnetic media with sub-100 nm positioning error, IEEE Transactions on Magnetics, 2011,
Kartik V., Pantazi A., Lantz M.A, Track-following high frequency lateral motion of flexible media, Digest of the Asia-Pacific Magnetic Recording Conference 2010, APMRC, 2010,
Sahoo D.R., Kartik V., Sebastian A., Pozidis H, Scanning probe microscopy using higher-mode electrostatically-actuated microcantilevers, IFAC Proceedings Volumes (IFAC-PapersOnline), 2010,
Kartik V., Sebastian A., Tuma T., Sahoo D.R., Pozidis H., Pantazi A., High speed nanopositioner with magneto resistance-based position sensing, IFAC Proceedings Volumes (IFAC-PapersOnline), 2010,
Kartik V., Eleftheriou E., Friction-induced dynamics of axially-moving media in contact with an actively-positioned surface, ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2009,
Kartik V., Wickert J.A, Parametric instability of a traveling plate partially supported by a laterally-moving foundation, ASME International Mechanical Engineering Congress and Exposition, Proceedings,9 PART C, 2008,
Kartik V., Wickert J.A, Surface friction guiding for reduced high-frequency lateral vibration of moving media, Journal of Vibration and Acoustics, Transactions of the ASME, 2007,
Son K.J., Kartik V., Wickert J.A., Sitti M, An ultrasonic standing-wave-actuated nano-positioning walking robot: Piezoelectric-metal composite beam modeling, JVC/Journal of Vibration and Control, 2006,
Kartik V., Wickert J.A, Vibration and guiding of moving media with edge weave imperfections, Journal of Sound and Vibration, 2006,
Kartik V., Wickert J.A., Surface friction guiding for reduced high frequency lateral vibration of moving media, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 2006,
Kartik V., Dee R.H, Measurement of dynamic azimuth of moving media in tape drives, INTERMAG ASIA 2005: Digests of the IEEE International Magnetics Conference, 2005,
Kartik V., Wickert J.A., Vibration and guiding of moving media with weave imperfections, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC, 2005,
Son K.J., Kartik V., Wickert J.A., Sitti M, A piezoelectric unimorph actuator based precision positioning miniature walking robot, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2005,
Kartik V., Houser D.R., Analytical predictions for the transmission error excitation in various multiple-mesh gear-trains, Proceedings of the ASME Design Engineering Technical Conference, 2003,
Kartik V., Houser D.R, An investigation of shaft dynamic effects on gear vibration and noise excitations, SAE Technical Papers, 2003,