Prof. Sandip Kumar Saha Publications
Dey P., Hedau G., Saha S.K., Experimental and numerical investigations of fluid flow and heat transfer in a bioinspired surface enriched microchannel, International Journal of Thermal Sciences, 2019,
Patel C.G., Sarkar S., Saha S.K, Mixed convective vertically upward flow past side-by-side square cylinders at incidence, International Journal of Heat and Mass Transfer, 2018,
Raul A.K., Bhavsar P., Saha S.K., Experimental study on discharging performance of vertical multitube shell and tube latent heat thermal energy storage, Journal of Energy Storage, 2018,
Majumdar R., Singh S., Saha S.K, Quasi-steady state moving boundary reduced order model of two-phase flow for ORC refrigerant in solar-thermal heat exchanger, Renewable Energy, 2018,
Raul A., Jain M., Gaikwad S., Saha S.K, Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications, Applied Thermal Engineering, 2018,
Kumar A., Saha S.K., Latent heat thermal storage with variable porosity metal matrix: A numerical study, Renewable Energy, 2018,
Bhagat K., Prabhakar M., Saha S.K., Estimation of thermal performance and design optimization of finned multitube latent heat thermal energy storage, Journal of Energy Storage, 2018,
Majumdar R., Saha S.K., Singh S, Evaluation of transient characteristics of medium temperature solar thermal systems utilizing thermal stratification, Applied Energy, 2018,
Garg H., Pandey B., Saha S.K., Singh S., Banerjee R., Design and analysis of PCM based radiant heat exchanger for thermal management of buildings, Energy and Buildings, 2018,
Ghosh D.P., Sharma D., Mohanty D., Saha S.K., Raj R, Facile Fabrication of Nanostructured Microchannels for Flow Boiling Heat Transfer Enhancement, Heat Transfer Engineering,, 2018,
Gorasiya A., Saha S.K.,, Single phase laminar fluid flow and heat transfer in microchannel with cylindrical and parallelepiped micro-fins, Heat and Mass Transfer/Waerme- und Stoffuebertragung, 2018,
Kewalramani G.V., Agrawal A., Saha S.K., Modeling of microchannel heat sinks for electronic cooling applications using volume averaging approach, International Journal of Heat and Mass Transfer, 2017,
Sharma S., Saha S.K., Comparative Study of Thermal Performance of Parallel Plate and Rectangular Microchannel Counter Flow Heat Exchangers, Heat Transfer Engineering, 2017,
Sisodia S.S., Sarkar S., Saha S.K., Fluid flow and mixed convective heat transfer around a semi-circular cylinder at incidence with a tandem downstream square cylinder in cross flow, International Journal of Thermal Sciences, 2017,
Siddique A., Medhi B.J., Agrawal A., Singh A., Saha S.K, Design of a collector shape for uniform flow distribution in microchannels, Journal of Micromechanics and Microengineering, 2017,
More M.V., Saha S.K., Marje V., Balachandran G, Numerical model of liquid metal flow in steel making tundish with flow modifiers, IOP Conference Series: Materials Science and Engineering, 2017,
Shinde A., Arpit S., Km P., Rao P.V.C., Saha S.K, Heat Transfer Characterization and Optimization of Latent Heat Thermal Storage System Using Fins for Medium Temperature Solar Applications, Journal of Solar Energy Engineering, Transactions of the ASME, 2017,
Shaligram A., Saha S.K, Application of dynamic bubble departure model for new, low-gwp refrigerants on enhanced, structured surfaces, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2017,
Saha S.K., Agrawal A., Soni Y, Heat transfer characterization of rhombic microchannel for H1 and H2 boundary conditions, International Journal of Thermal Sciences, 2017,
Lakhani S., Raul A., Saha S.K., Dynamic modelling of ORC-based solar thermal power plant integrated with multitube shell and tube latent heat thermal storage system, Applied Thermal Engineering, 2017,
Srinivasan S., Diallo M.S., Saha S.K., Abass O.A., Sharma A., Balasubramanian G., Effect of temperature and graphite particle fillers on thermal conductivity and viscosity of phase change material n-eicosane, International Journal of Heat and Mass Transfer, 2017,
Kumar A., Saha S.K., Energy and exergy analyses of medium temperature latent heat thermal storage with high porosity metal matrix, Applied Thermal Engineering, 2017,
Katiyar G., Karagadde S., Saha S.K., Sharma A.,, Numerical modelling of bubble growth in microchannel using Level Set Method, International Journal of Heat and Mass Transfer, 2016,
Bhagat K., Saha S.K, Numerical analysis of latent heat thermal energy storage using encapsulated phase change material for solar thermal power plant, Renewable Energy, 2016,
Singh M.K., Yadav D., Arpit S., Mitra S., Saha S.K., Effect of nanofluid concentration and composition on laminar jet impinged cooling of heated steel plate,, Applied Thermal Engineering, 2016,
Ghosh D.P., Raj R., Mohanty D., Saha S.K, Onset of Nucleate Boiling, Void Fraction, and Liquid Film Thickness,Microchannel Phase Change Transport Phenomena, 2015,
Dasare R.R., Saha S.K., Numerical study of horizontal ground heat exchanger for high energy demand applications, Applied Thermal Engineering, 2015,
Saha S.K., Dutta P., Performance Analysis of Heat Sinks With Phase-Change Materials Subjected to Transient and Cyclic Heating, Heat Transfer Engineering, 2015,
Saha S.K., Baelmans M., A design method for rectangular microchannel counter flow heat exchangers, International Journal of Heat and Mass Transfer, 2014,
Saha S.K., Dutta P.,, Role of melt convection on optimization of PCM-based heat sink under cyclic heat load, Heat Transfer Engineering, 2013,
Mitra S., Saha S.K., Chakraborty S., Das S, Study on boiling heat transfer of water-TiO 2 and water-MWCNT nanofluids based laminar jet impingement on heated steel surface, Applied Thermal Engineering, 2012,
Saha S.K., Dutta P., Thermal management of electronics using PCM-based heat sink subjected to cyclic heat load, IEEE Transactions on Components, Packaging and Manufacturing Technology, 2012,
Saha S.K., Dutta P., Effect of melt convection on the optimum thermal design of heat sinks with phase change material, Journal of Enhanced Heat Transfer, 2011,
Saha S.K., Dutta P.,, Heat transfer correlations for PCM-based heat sinks with plate fins, Applied Thermal Engineering, 2010,
Kumar V., Kapoor S., Arora G., Saha S.K., Dutta P, ,A combined CFD and flow network modeling approach for vehicle underhood air flow and thermal analysis, SAE Technical Papers, 2009,
Saha S.K., Dutta P.,, Role of melt convection on the thermal performance of heat sinks with phase change material, 10th Electronics Packaging Technology Conference, EPTC , 2008,