Prof. Anirban Guha Publications
Malik P.K., Rajput R., Guha A., Seshu P., Motion Synthesis in Tensegrity Mechanisms, International Conference on Reconfigurable Mechanisms and Robots, ReMAR, 2018,
Kulkarni S., Guha A., Equation-based domain knowledge utilization into neural network structure and learning, Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2018,
Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A, Microstructural damage based micromechanics model to predict stiffness reduction in damaged unidirectional composites, Journal of Reinforced Plastics and Composites, 2018,
Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A, Numerical Study and Experimental Validation of Effect of Varying Fiber Crack Density on Stiffness Reduction in CFRP Composites, Journal of Materials Engineering and Performance, 2018,
Shimpi R.P., Shetty R.A., Guha A, A single variable shear deformable nonlocal theory for transversely loaded micro- and nano-scale rectangular beams, Sadhana - Academy Proceedings in Engineering Sciences, 2018,
Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A, Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP, Composites Science and Technology, 2018,
Desai R., Guha A., Seshu P, Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, Procedia Computer Science, 2018,
Hiremath C.P., Senthilnathan K., Naik N.K., Guha A., Tewari A., Mechanistic model for fiber crack density prediction in cyclically loaded carbon fiber-reinforced polymer during the damage initiation phase, Journal of Composite Materials, 2018,
Ghosh K., Guha A., Duttagupta S.P., Power generation on a solar photovoltaic array integrated with lighter-than-air platform at low altitudes, Energy Conversion and Management, 2017,
Shimpi R.P., Shetty R.A., Guha A, A simple single variable shear deformation theory for a rectangular beam, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017,
Ghosh K., Guha A., Duttagupta S.P., Gupta P.K, A solar PV integrated contoured kite as a hybrid power generating system, India International Conference on Power Electronics, IICPE, 2017,
Shimpi R.P., Shetty R.A., Guha A, A single variable refined theory for free vibrations of a plate using inertia related terms in displacements, European Journal of Mechanics, 2017,
Senthilnathan K., Hiremath C.P., Naik N.K., Guha A., Tewari A, Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading, Composites Part A: Applied Science and Manufacturing, 2017,
Sahoo D.K., Dewan P., Srivastava P., Kohli A.K., Sandhu I.P.S., Kumari R., Saroha D.R., Guha A., Tewari A., Singh R.K., Performance of Gamma Chamber under blast loading, Annals of Nuclear Energy, 2017,
Carpenter J.R., Guha A., Heifetz E, A physical interpretation of the wind-wave instability as interacting waves, Journal of Physical Oceanography, 2017,
Sahoo D.K., Guha A., Tewari A., Singh R.K, Performance of Monolithic Plate and Layered Plates under Blast Load, Procedia Engineering, 2017,
Guha A., Udwadia F.E., Nonlinear dynamics induced by linear wave interactions in multilayered flows, Journal of Fluid Mechanics, 2017,
Shah S., Guha A., Bearing health monitoring, Tribology in Industry, 2016,
Menghani D., Guha A., Packing Boxes into Multiple Containers Using Genetic Algorithm, Journal of The Institution of Engineers (India): Series C, 2016,
Satpal S.B., Guha A., Banerjee S, Damage identification in aluminum beams using support vector machine: Numerical and experimental studies, Structural Control and Health Monitoring, 2016,
Gupta S., Satpal S.B., Banerjee S., Guha A., Vibration based health monitoring of honeycomb core sandwich panels using support vector machine, International Journal on Smart Sensing and Intelligent Systems, 2016,
Guha A., Mechoso C.R., Konor C.S., Heikes R.P, Modeling rossby wave breaking in the southern spring stratosphere, Journal of the Atmospheric Sciences, 2016,
Kshirsagar A., Guha A., Design optimization of rocker bogie system and development of look-up table for reconfigurable wheels for a planetary rover, International Journal of Vehicle Structures and Systems, 2016,
Chichani S., Guha A., A Method of Modeling Fabric Shear using Finite Element Analysis, Journal of The Institution of Engineers (India): Series E, 2015,
Sharma K., Guha A., Pawaskar D.N., Singh R.K., Impact stress reduction by shell splitting in cask for transporting radioactive material,, Annals of Nuclear Energy, 2015,
Mody M., Guha A., Seshu P., A simple strategy for tyre force distribution to improve the performance of a four wheel independent steer-by-wire vehicle, IFToMM World Congress Proceedings, IFToMM, 2015,
Hiremath C., Senthilnathan K., Guha A., Tewari A., Effect of Volume Fraction on Damage Accumulation for a Lattice Arrangement of Fibers in CFRP, Materials Today: Proceedings, 2015,
Sharma K., Pawaskar D.N., Guha A., Singh R.K., Optimization of cask for transport of radioactive material under impact loading, Nuclear Engineering and Design,, 2014,
Guha A., Lawrence G.A., A wave interaction approach to studying non-modal homogeneous and stratified shear instabilities, Journal of Fluid Mechanics, 2014,
Satpal S.B., Khandare Y., Guha A., Banerjee S, Structural health monitoring of a cantilever beam using support vector machine, International Journal of Advanced Structural Engineering, 2013,
Guha A., Lawrence G.A, Estuary classification revisited, Journal of Physical Oceanography, 2013,
Satpal S., Khandare Y., Guha A., Baneijee S., Structural Health Monitoring (SHM) of cantilever beam using support vector machine, Journal of Structural Engineering (India), 2013,
Guha A., Rahmani M., Lawrence G.A., Evolution of a barotropic shear layer into elliptical vortices, Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 2013,
Dhamija L., Anilkumar G., Guha A., Singh R.K., Kinematic analysis and design optimisation of a surgical rod cutter for shearing of Ti6Al4V rods, International Journal of Materials and Product Technology, 2012,
Guha A., Amarnath C, Adjustable mechanism for walking robots with minimum number of actuators, Chinese Journal of Mechanical Engineering (English Edition),, 2011,
Guha A., Barron R.M., Balachandar R, An experimental and numerical study of water jet cleaning process, Journal of Materials Processing Technology, 2011,
Guha A., Frigaard I.A., Unconditional linear stability of plane couette-poiseuille flow in presence of cross flow, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE, 2010,
Guha A., Performance evaluation and enhancement of artificial neural networks in prediction modelling, Soft Computing in Textile Engineering, 2010,
Guha A., Frigaard I.A, On the stability of plane Couette-Poiseuille flow with uniform crossflow, Journal of Fluid Mechanics, 2010,
Guha A., Amarnath C., Pateria S., Mittal R., Measurement of yarn hairiness by digital image processing, Journal of the Textile Institute, 2010,
Guha A., Amarnath C., Kurien Issac K., Talukdar M.K., Joshi S., Linkage Driven Dobby with Dwell, Textile Research Journal, 2009,
Sharma M., Guha A., A method for validation of a model of balloon in ring frame, Indian Journal of Fibre and Textile Research, 2008,
Guha A., Ramakrishnan N., Talukdar M.K., Sharma P., Coth roll doffing machine for Indian powerloom industry, Indian Journal of Fibre and Textile Research, 2008,
Guha A., Amarnath C., Talukdar M.K., Manoj A.G., A novel mechanism for driving the sley in a shuttle loom, Journal of the Textile Institute, 2006,
Guha A., Amarnath C., Talukdar M.L.K., Manoj A.G., A novel mechanism for driving the sley in a shuttle loom, Proceedings of the 12th National Conference on Machines and Mechanisms, NaCoMM, 2005,
Chattopadhyay R., Guha A., Jayadeva, Performance of neural networks for predicting yarn properties using principal component analysis, Journal of Applied Polymer Science, 2004,
Chattopadhyay R., Guha A, Artificial neural networks: Applications to textiles, Textile Progress, 2003,
Jayadeva, Guha A., Chattopadhyay R, A study on the capability of a neural network ranking fibre parameters having an influence on yarn properties, Journal of the Textile Institute, 2003,
Banerjee P.K., Chattopadhyay R., Guha A., Investigations into homogeneity of coir fibres, Indian Journal of Fibre and Textile Research, 2002,
Guha A., Chattopadhyay R., Jayadeva, Predicting Yarn Tenacity: A Comparison of Mechanistic, Statistical, and Neural Network Models, Journal of the Textile Institute, 2001,
Guha A., Murthy V.S.R, Refinement of directed melt oxidized structures, Bulletin of Materials Science, 1996,
Singh R., Bachelor A., Guha A.K., Verma T.N., Mitra S.K., Kamath C.D., Introduction of Injection Technology in Tata Steel as a Technique for Maintenance of Blast Furnace Stack, Transactions of the Indian Ceramic Society, 1993,